0 Product Products R0

No products

To be determined Shipping
R0 Total

Check out

D-Link ANT24-CB06N HDF-400 Extension Cable For ANT24 Series 6M PANT24-CB06N View larger

D-Link ANT24-CB06N HDF-400 Extension Cable For ANT24 Series 6M



Available to Order

R715 tax incl.

More info

D-Link ANT24-CB06N HDF-400 , extension cable for ANT24 series antenna - 6 meter

Product Features:

19.68ft HDF 400 50ohm Low Loss Antenna Cable
For use with D-Link ANT24 Series Antennas
Operates at 2.4GHz ISM Band
Ideal for both 802.11b and 802.11g Wireless Access Points
Product Description:

D-Link, the industry pioneer in wireless networking, introduces the D-Link ANT24-CB03N, ANT24-CB06N, and ANT24-CB09N Antenna RF Cables. These products are designed for outdoor or rooftop
installations when distance between a wireless Access Point (AP) and an antenna is required. With
these Radio Frequency (RF) cables and D-Link’s ANT24 line of outdoor antennas, an indoor wireless
AP/Bridge can be used in an outdoor deployment.

The D-Link ANT24 Antenna RF Cables are available in three lengths: 3m (9.84ft); 6m (19.68ft); and 9m
(29.52ft). All of them can be inter-connected. On one end of each cable is an “N-plug” and on the other end is an “N-jack” with high-quality N-type connectors.

The D-Link Antenna RF Cables are based on the HDF-400 specification to minimize the signal loss introduced to a wireless LAN. The frequency responses of the cables coincide with the 2.4GHz ISM band so that the cables are ideal for both IEEE 802.11b and IEEE 802.11g WLANs. With 50 ohms of impedance, the RF cables can be used with most D-Link WLAN products. This impedance match eliminates any Voltage Standing Wave (VSW) issues in an RF circuit, and any noticeable decrease in the amplitude of the RF signal.


4 other products in the same category: