Zalman VF700-Cu All Copper Fin 8x Memory Heatsinks Included Vga Cooler FVC-ZVF7C

zalman VF700-Cu - all copper fin + 8 x vga memory heatsink included , support silend/ normal mode ; 2 ball bearing 80mm fan ; speed: 1350/ 2650 rpm ; noise level : 18.5/ 28.5dB , 270g - pls note : not to be used with Matrox

Does not generate noise or vibration in Silent Mode.

Pure Copper base material ensures excellent heat dissipation.

Fan installed in the heatsink(FHS) cools not only the VGA chipset and VGA RAM, but all other VGA components as well.

Silent Mode and Normal Mode selection provided to accommodate the user's environment and preference.

Dimensions : 91(L) x 126.4(W) x 30(H)mm Bearing Type : 2 Ball-Bearing
Weight : 270g Speed : 1,350 ~ 2,650rpm ± 10%
Base Material : Pure Copper Noise Level : 18.5~ 28.5dBA ± 10%

Compatibility List

Recommended VGA Cards for VF700

ATI Radeon 9*** Series
ATI Radeon x*** Series
NVIDIA Geforce4 Mx Series
NVIDIA Geforce Fx 5200
NVIDIA Geforce Fx 5500
NVIDIA Geforce Fx 5600(Fx 5700)

NVIDIA Geforce4 Ti 4*** Series
NVIDIA Geforce Fx 5700(Ultra) Series
NVIDIA Geforce Fx 5800 Series
NVIDIA Geforce Fx 5900 Series
NVIDIA Geforce Fx 5950 Series
NVIDIA Geforce 6600 Series

NVIDIA Geforce 6800 LE Series
NVIDIA Geforce 6800 Series
NVIDIA Geforce 6800 GT Series
NVIDIA Geforce 6800 Ultra Series
NVIDIA Geforce 6800 Ultra
NVIDIA Geforce 7600 Series
NVIDIA Geforce 7800 GT Series
NVIDIA Geforce 7800 GTx Series
NVIDIA Geforce 7900 GT Series
ATI Radeon x1800 Series

- Heatsink Assembly (VF700-Cu)
- Eight RAM Heatsinks
- One Brace Plate
- Two Nipple A
- Two Nipple B
- Four Bolt A
- Four Bolt B
- Six Rubber Rings
- Thermal Grease
- One Muti-Connector
- User's Manual - in English and Korean

Zalman affixes a Computer Noise Prevention System (CNPS) mark to all components used for noiseless computers.

After installing this product on a VGA card, a PCI slot adjacent to the AGP (or PCle) slot will become unusable.

This product is not compatible with Matrox VGA cards and NVIDIA PCx 5*** VGA cards.

To enhance the performance of this product, using a rear case fan is recommended.

Zalman is not responsible for any problems arising from incorrect installation.

The Nipples MUST be tightened by hand. Using tools to tighten the nipples may break the tip of the nipples.